GROUP A
Iso: 800
Shutter Speed: 1/30th
Aperture: 4.5
I shot this picture by using the settings of Manual mode and in manual mode i had to choose a shutter speed and aperture manually. In this picture i needed a small depth of field so i used a low aperture. I needed to take a picture of him with a good amount of light showing so i used ISO 800 so light can pass through the camera.
Iso: 3200
Shutter Speed: 1/200th
Aperture: 4.5
I needed to take a picture of my friend moving or jumping but i needed to get a pic of him in the air without any blur in the picture. In order to get that done i needed to change the shutter speed so i went to manual mode. In manual mode i used 1/200th shutter speed so it can freeze the picture and not produce any blur. With a high shutter speed you need a high ISO so i changed it to 3200 so a lot of light can come through the camera.
Iso: 400
Shutter Speed: 1/13th
Aperture: 15.0
I needed to take a picture without any grainy in the picture so in order to do that i needed a low iso. So i used manual mode so i can manually change the ISO, white balance, Shutter Speed and Aperture. In order not to get grain in my picture i needed a low ISO so i changed it to 400 and i needed a high aperture so i changed it to 15.0.
Iso: 3200
Shutter Speed: 1/30th
Aperture: 13.0
In order to take a blurred motion selfie using the the timer and shutter time priority value. In order to get a blurred picture i red a low shutter speed but a high ISO. You also need a decent aperture, which mine was 13.0 so a good amount of light can come through.
4E) Throughout this unit i learned things I've never knew about taking a good picture. I learned 3 things you need in order to take a good picture, and that is Iso, Aperture, and Shutter Speed. There is many things you need to take a nice, frozen picture. You would need to change your settings to a low aperture with the iso at 800 and the shutter speed at 1/60th of a second. I also learned how to make a custom white balance shot using the light meter. I also learned how to put a timer on the camera so i can get in the picture.
Shutter Speed: 1/30th
Aperture: 13.0
In order to take a blurred motion selfie using the the timer and shutter time priority value. In order to get a blurred picture i red a low shutter speed but a high ISO. You also need a decent aperture, which mine was 13.0 so a good amount of light can come through.
4E) Throughout this unit i learned things I've never knew about taking a good picture. I learned 3 things you need in order to take a good picture, and that is Iso, Aperture, and Shutter Speed. There is many things you need to take a nice, frozen picture. You would need to change your settings to a low aperture with the iso at 800 and the shutter speed at 1/60th of a second. I also learned how to make a custom white balance shot using the light meter. I also learned how to put a timer on the camera so i can get in the picture.
No comments:
Post a Comment